Metal logos and signs
Flat-cut letters and logos to identify your business.
What do you need to make?
We cut metal to your design. Start with an idea, an image or a drawing: we review how to turn it into a flat part using CNC laser cutting.
Base plates with holes
Bases and plates with holes to the dimensions in your drawing.
Decorative metal screens
Cut-out patterns to divide spaces and add character.
Supports and gusset plates
Flat parts for connections and reinforcement, ready for the next operation.
Metal letters and numbers
Names and numbers for facades, addresses and signs.
Flange blanks, rings and discs
Circular profiles with or without holes, following your design.
Gate and facade panels
Sheet-metal cut-out designs to incorporate into your project.
Cabinet covers and front panels
Flat panels with windows, ventilation slots and mounting points.
Custom decorations and shapes
Original silhouettes and designs cut in metal to your dimensions.
Templates and stencils
Cut-out patterns for marking or repeating shapes.
Parts made to drawing
Custom geometry for prototypes, replacement parts or manufacturing.
Batches of identical parts
Defined quantities per part for production and assembly.
Materials and project specifications
| Material | Cutting range* |
|---|---|
| Carbon steel | 24 ga to 5/8 in |
| Stainless steel | 24 ga to 1/2 in |
| Aluminum | 24 ga to 3/8 in |
*Ranges from the current technical sheet, subject to validation for material, geometry and dimensions. Capacity and conditions are confirmed before production.
Current tolerances and minimum feature guidance
- Carbon steel: +/-0.15 mm to +/-0.40 mm
- Stainless steel: +/-0.15 mm to +/-0.35 mm
- Aluminum: +/-0.20 mm to +/-0.40 mm
- Holes / details: Recommended minimum diameter 0.8x to 1x thickness
For your quote
- An image, sketch or drawing of what you need
- Dimensions, units and quantity per part
- Material and thickness, if known
- A scale DXF/DWG file for technical review
- Critical tolerances and subsequent operations
You do not need to know the process name to enquire. If you only have an image, we review what is missing; the manufacturing file and scope must be confirmed before cutting.
How your project gets started
Share your project
Tell us what you need and send a file, image or sketch.
We review the details
We check material, dimensions, quantity and feasibility.
Receive your quote
We send a proposal defining the scope of your project.
Frequently asked questions
Can I request a quote without a drawing?
You can send an image or sketch with approximate dimensions and quantity. We review what is missing; a scale DXF or DWG, material, thickness and tolerances must be confirmed for manufacturing. File preparation is reviewed separately.
What materials and thicknesses can you cut?
We process carbon steel, stainless steel and aluminum plate and sheet. See the indicative ranges on this page; final capacity depends on material, thickness, dimensions and geometry and is confirmed during project review.
Does cutting include bending, painting or installation?
No. These examples show flat-cut parts. Bending, painting, assembly, welding, mounting and installation are not included in cutting. Tell us about any additional operations so the quote scope can be reviewed and defined.
Can I request a single part or a batch?
State the quantity required per design. We review both single-part enquiries and batches considering setup, material and feasibility; price and conditions are confirmed in the quotation.