Structural profile cutting
We cut channels, angles, purlins and other profiles to the lengths stated in the cut list.
- Profile type, section and material.
- Lengths and quantities per piece.
- Tolerances and measurement reference.
Band-saw cutting options
What material do you need cut?
The most common requests are separated here so the service is easy to identify even without knowing the technical process name. They are all reviewed as band-saw cutting.
Beam cutting
We prepare beams to length for fabrication and erection, subject to review of the section and equipment capacity.
- Beam type and section.
- Final length and number of pieces.
- Straight or angled cut requested.
Tube and HSS/PTR cutting
We cut round, square and rectangular tubing for assembly and fabrication.
- Tube shape, section and wall thickness.
- Lengths, quantities and orientation.
- Tolerance required for assembly.
Bar and solid-section cutting
We produce blanks from round, square and other solid sections for machining, welding or fabrication.
- Shape, diameter or solid section.
- Length and quantity by size.
- Stock allowance for the subsequent process.
Straight and mitre cuts
We review square or angled cuts when orientation and reference length are clearly defined.
- Cut angle and orientation.
- Reference length stated.
- Drawing or sketch to avoid ambiguity.
Cut lists and repeat series
We process lists with several lengths or repeat pieces for production, workshop assembly or material preparation.
- List grouped by material and section.
- Length and quantity for each line.
- Priorities or partial deliveries agreed.
Description
Cut-to-length band-saw service for profiles, beams, tubes and bars, producing clean cuts for assembly or subsequent machining.
Presentation
- Cutting of profiles and solid sections within the reviewed equipment range.
- Straight and mitre cuts according to the cut list.
- Short runs or repeat cutting according to the customer's programme.
Uses
- Material preparation for structures and metal fabrication.
- Precision blanks for machining or welding.
- Repeat pieces for production and site assembly.
Features
- Controlled lengths for subsequent assembly.
- Tolerance reviewed against the project requirement.
- No heat input from the cutting process.
Information
Band-saw cutting prepares profiles, tubes, beams and bars to defined lengths without a thermal process. Each enquiry is reviewed by section, material, length, quantity, angle and tolerance.
What to consider
- Specify profile or bar type, cross-section and material.
- Provide a cut list with lengths, quantities and angles.
- Mark critical tolerances and the measurement reference.
Service and delivery
Cutting is quoted in General Escobedo; delivery of finished pieces is coordinated with the material order and destination.
Frequently asked questions
Which sections can be reviewed for cutting?
Profiles, tubes, beams and bars within the equipment conditions. Share the cross-section and dimensions to confirm feasibility.
Can mitre cuts be requested?
Include the angle, orientation, reference length and quantity so the scope can be reviewed.
What tolerance should I specify?
Tolerance should reflect the assembly or subsequent process. Mark critical dimensions in the drawing or cut list.